|
1. First you need to have an accont with GismoTel. Please sign up for an account.
2. Open a session to the SPA by typing: http://
To find out the IP address, please lift up your handset, press **** (voice menu)
and then press 110#
3. Click "Admin Login" in the upper right hand corner and then click "Advanced"
4. The browser will show a tabbed user interface. Select the Line 1 tab to configure a
service for line 1.
Line 2 can also be configured from the Line 2 tab.
Line Configuration
Click "Advanced" at the bottom of the page.
Click "Line 1" tab, and enter the following in the available fields.
Set Proxy to: sip.gismotel.com
Set Outbound Proxy to: sip.gismotel.com (only when your device is behind a
NAT)
Set "Use Outbound Proxy" to: no (Yes, when outbound Proxy has been
activated)
Set User ID to your assigned receiving calls phone number (e.q. 777777)
Set "NAT keep Alive" to "yes"
Set "Register" to "yes"
Set "Register Expires" to 300
Set Auth ID to your 6-digit account number
Set User Auth ID to yes
Set Display Name to an identifier to be displayed on callee's CallerID.
Set Password to your account's password (e.q. YYYYY)
Set "Use ObProxy in Dialog" to: yes
Click "Provisioning" tab, set Provisioning Enable: no
Press the Submit All Changes at the bottom of the web page
5. The Registration State in the Info tab should now display "Registered"
Recommended Dial Plan Setting
(Please note we do NOT support 911 or 112 or any other emergency calls)
That is why these calls must be rerouted to the normal PSTN line.
DialPlan can be at the bottom page of your line 1 or line 2 tab at:
http://
Click "Admin Login", then click "advanced").
You can copy and paste the below configuration to your Spa:
(7xxxxxS0|<911:123456789>|*x.|x.)
(for USA where 911 is active)
or
(7xxxxxS0|<112:123456789>|*x.|x.)
(for Europe where 112 is active)
PLEASE check your own emergency calls number and use that in the above.
|
